Get the Latest Software From ij.start.cannon/ts3322 download and Complete Printer Setup
For an amazing printing experience, you can visit ij.start.cannon/ts3322 download and
complete the printer setup with driver download on your Canon TS 3322
printer. This printer all in one device that comes with a hybrid in the
system and prints the clean, quality documents for the customers. With
the Canon TS 3322 printer, you can fulfill all your printing and
scanning requirements right after completing the setup process. So, get
the pleasure of printing the documents with complete comfort using this
canon printer model. In this guide, we will be sharing the simple
steps that can help you to complete the printer setup on your device.
So, get the right printer driver downloaded for your system, complete
the setup, and start using printer services to meet your day-to-day
printing requirements without any hassle.
Before
we proceed with the ij.start.cannon/ts3322 download, there are
certain conditions that your device must fulfill for using the WPS
connection method for the setup:
- A 'Physical WPS push' button needs to be available on the 'access point'. To get more information about this, you can go through the user guide.
- Your wireless connection should support the 'WPA' or 'WPA2" Security protocol. Most of the time, WPS enabled access point refuses to make a connection with the WPS method if there has been a Wired Equivalent Privacy (WEP) method applied on the Wi-Fi network. To confirm this, you need to check the Wi-Fi settings on your device.
Proceed with the setup process: Steps to Follow:
- Before you start, you need to confirm that your Wi-fi is present within the range of your Canon Pixma printer. Your WPS button should be ready to be clicked.
- Press the WiFi button (A) on your Canon printer and hold this button until you see the WiFi lights (B) start to flash.
- Now, Press the Color button (C).
- Hit the WiFi button, until you see the 'Direct Lamp' light (D) turns on.
- Now, push the 'Color' button and check if the 'ON' lamp (E) and the 'WiFi lamp start to blink. After that, you need to press the 'WPS' button press on the router within 60 seconds. The Blue WiFi light on your device with start to flash when searching. 'Power' and 'WiFi' lights will blink while making a connection to the access point.
- Once your Canon printer has established connection successfully, you will see that the 'Power' and 'WiFi' lights stop blinking. For more details, you can go through the user manual.
Network setting confirmation
- Your Canon Printer should be powered on.
- Load the A4 sheet in your printer.
- Press the 'WiFi' button and hold it until you see the WiFi light blinks once. After that, release the button.
- Hit the 'Color' button.
- Press the 'WiFi' button.
- Hit the 'Color' button again.
The
network setting confirmation detail page will get printed. When you
are referring to the printed page, check out 'Connection' indicating
'Active' State and the Service Set Identifier (SSID) - your Wi-Fi
network name, make sure that you have entered the correct name for your
Wi-Fi network.
These
are the simple steps that you need to follow for the WPS setup
process. Now, install the printer software using
ij.start.cannon/ts3322 download link. If you got a CD, you can
install the software by inserting it into your CD drive. But, we
recommend you to download the software online because there you will
find the latest available version for your device. However, if you are
unable to do it on your own, we recommend you to contact Canon printer
experts now. The professionals will guide you with all the necessary
details and help you to complete the printer setup without any hassle.
So set up your canon printer connection, and start printing the
documents.
Comments
Post a Comment